Complete MGF rear subframe ready to bolt straight onto the bodyshell. It was bolted to my old GTA unfinished project about 5 years ago and has been sat in my unit gathering dust since after I scrapped the shell. It comes with: - Yellow band MGF rack with MGF track rod ends
- Fully polybushed front wishbones with MGF bottom ball joints. The top arms are MGF so has a better design for the socket joint for the hydrogas units
- MGF rear hydrogas units with individualising valves. The cones have been shortened slightly for a 40 mm drop (cannot remember the figure I cut off)
- Complete Metro front hub carriers with MGF steering arms
- MGTF 160 solid subframe mounts
- PG1 left mounting arm
The subframe has all extra bits cut off it and has been painted satin black, there is a little bit of surface rust coming through in places but is only cosmetic. A photo that shows most of it before it was completed is here.
It is a reluctant sale but need it gone this weekend and would be collection only due to the size from just outside Skegness, Lincolnshire.
I would like £160 for it but I am open to offers.
Cheers
Dave
Edited by Duckers 10/3/2017 3:59 PM
| 
Complete Converted MGF Rear Subframe Assembly
