Viewing a thread

You are logged in as a guest. ( logon | register )

Aerial replacement Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page]
Technical Area-> I.C.E.	Message format

Mad_shaun

Posted 1/9/2011 12:45 AM (#626331)
Subject: Aerial replacement

Veteran

Posts: 342
100

Location: Radstock

Dear all,
I need to replace my aerial cable from the back of my hifi to the base of the roof mount. The cable is broke as there is no conductivity,
What is the best way to get out the old cable and install the new?

is it a case of taping a wire to the aerial plug then seeing if it will pull through? Or will I have take out the glove box, etc.

regards
Shaun

Mutts

Posted 1/9/2011 3:05 AM (#626339 - in reply to #626331)
Subject: RE: Aerial replacement

Lotus powered R100
MP Admin

5000

Location: Torbay, South Devon, UK

Doubt it will just pull through (use it as a draw wire) it'll be taped up with the other wires i'd imagine.

From memory that wire goes from the aerial mount, across the roof, down the N/S A pillar, across the bulkhead under the dash & into the H/U.

I don't doubt it will be a full dashboard out job & maybe the front bit of roof lining as well (or cut through it)

tommib

Posted 1/9/2011 8:51 AM (#626365 - in reply to #626331)
Subject: RE: Aerial replacement

Expert

Posts: 1465
1000

Location: barnsley,south yorkshire / www.djtommib.co.uk

In essence that's what I said but it was removed

wibblyp

Posted 4/9/2011 1:41 PM (#626674 - in reply to #626331)
Subject: RE: Aerial replacement

Regular

Posts: 298
100

Location: west country

Dump the front one and replace with a Blaupunkt DAB at the rear, invest in a DAB unit.Not too bad taking out the head and side cloth and only a bit fiddly thru the pillars

Jump to page : 1
Now viewing page 1 [25 messages per page]

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software