Posted 17/2/2012 8:24 PM (#648176 - in reply to #648082) Subject: RE: Rear Turrets
Expert
Posts: 9862 Location: Cornwall
i have made stub axles to which are extended an take a bolt in to them, but not batch produced them yet, however i will be shortly, an looks like they will be about £70 ish.
thanks for the comments, machine, i think thats a compliment lol
Posted 18/2/2012 11:05 AM (#648213 - in reply to #648082) Subject: RE: Rear Turrets
Member
Posts: 30
I have little experience/information on this mod so I wonder if someone could help me out.
Are these for use with just dampers or coilover set ups?
When fitting these do you remove the Hydrogas setup?
What gains are made?
To match the front is it a case of fitting an MGTF subframe?
Posted 18/2/2012 1:05 PM (#648216 - in reply to #648213) Subject: RE: Rear Turrets
Expert
Posts: 9862 Location: Cornwall
These where designed for dampers, however with an extra strengthening on the top they should be fine for coilovers as long as they fit in ok.
if you run dampers they just give better damping, and if you run coilovers you would be able to remove all the hydragas stuff an possibly have even better handleing.
on the front, if you want coilovers TF subframe is best or for dampers you can just fit the upper shock mounts.
Posted 15/5/2012 5:13 PM (#662364 - in reply to #648082) Subject: RE: Rear Turrets
Expert
Posts: 9862 Location: Cornwall
i have never done it before myself, however if you have a method if fixing the coilover tot he hub it shouldnt be hard, probably the hardest bit would be getting the turret aligned in the arch but nothing a bit of time wouldnt solve.
Rear Turrets
lol 
