![]() | ||
Metropower Portal | ||
| ||
![]() Moderators: Jump to page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Now viewing page 5 [25 messages per page] | |
Gallery-> Members' Journals | Message format |
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | im now going to try and upload a video wont upload so hers a pic before i take seats for trimming Edited by dazbooker 2/1/2009 11:09 AM ![]() (003.jpg) Attachments ---------------- ![]() | ||
Access_denied![]() |
| ||
![]() Expert Posts: 6619 ![]() ![]() ![]() ![]() Location: Guildford | I notice you have refitted the hydrogas straps, is your subframe not solid mounted at the rear? It will make a big difference to the car if you remove the rubber block thats above the subframe and put in an alloy block or box section and bolt through from the floor above. Is it pug shocks you have used? I guess they are a very compact unit and very stiff as they wont get as much compression at that angle as if mounted upright so would need to be stiffer to compensate? | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | Access_denied - 2/1/2009 12:25 PM I notice you have refitted the hydrogas straps, is your subframe not solid mounted at the rear? It will make a big difference to the car if you remove the rubber block thats above the subframe and put in an alloy block or box section and bolt through from the floor above. Is it pug shocks you have used? I guess they are a very compact unit and very stiff as they wont get as much compression at that angle as if mounted upright so would need to be stiffer to compensate? no the subframe isnt solid mounted i didnt really want to mount solid to reduce stress fractures in the boot floor which i had experiances with a long time ago on my original shell due to ridding on bumpstops im still pondering over that idea but now i have removed the interior it might be easier to do the shocks are ones i had made by avo whicj only have a very short stroke | ||
JamieS![]() |
| ||
"MG Metro 1300"![]() ![]() ![]() ![]() Location: Warwickshire, UK | I spy a big sub box? What ya got? | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | JamieS - 2/1/2009 2:58 PM I spy a big sub box? What ya got? two ten inch pioneers along with three pioneer amps ,head unit,dsp and door speakers | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | ive decided to solid mount the rear subframe heres a picture of where i drilled followed by the block i fabricated to replace the rubber mount and then the block fitted ![]() (001.jpg) ![]() (002.jpg) ![]() (003.jpg) ![]() (004.jpg) ![]() (005.jpg) ![]() (006.jpg) Attachments ---------------- ![]() ![]() ![]() ![]() ![]() ![]() | ||
Pandy![]() |
| ||
![]() Fish freak! MP Admin Posts: 14989 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Birmingham | Looking good mate ![]() Are those fitted matts? | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | Pandy - 3/1/2009 10:22 AM Looking good mate ![]() Are those fitted matts? there mats i bought made for metro | ||
Pandy![]() |
| ||
![]() Fish freak! MP Admin Posts: 14989 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Birmingham | Can you remembr where you got them from as im struggling to find a decent fit set, most are the complete wrong shape | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | Pandy - 3/1/2009 10:38 AM Can you remembr where you got them from as im struggling to find a decent fit set, most are the complete wrong shape cant remenber mate bought them off internet took me ages to find some just have to have a look on net | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | update managed to find a bran new pair of parcel shelf supports from a company in plymouth in ash grey should have them tomorrow chris t managed to find me some seat frame trims in ash grey and a pair of rear quarter trims in ash grey off to pick those up from chris on saturday so should look good with the black leather just worried the granite dash wont go with the black | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | look what arrived brand new not a lot of these about | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | look what arrived brand new not a lot of these about | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | look what arrived brand new not a lot of these about![]() (002.jpg) ![]() (003.jpg) ![]() (004.jpg) Attachments ---------------- ![]() ![]() ![]() | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | and picking these side panels up on saturday![]() (001.jpg) Attachments ---------------- ![]() | ||
quick_spider![]() |
| ||
Expert Posts: 4262 ![]() ![]() ![]() ![]() ![]() ![]() Location: Tebworth | Did you manage to get the bit that surrounds the seatbelt? I'm missing one on my set that colour! Edit: got some of those too! Just need to get round to fitting them! Edited by quick_spider 8/1/2009 1:29 PM | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | quick_spider - 8/1/2009 1:28 PM Did you manage to get the bit that surrounds the seatbelt? I'm missing one on my set that colour! Edit: got some of those too! Just need to get round to fitting them! i didnt mate think im going to try and get some paint to try and match colour and paint my original ones | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | after a six hour drive got my new panels and carpet today off chris T, thanks mate for getting these. going to fit these tomorrow ready for my new seats. will posty another pic when fitted. | ||
purple-haze![]() |
| ||
![]() Expert Posts: 1364 ![]() ![]() ![]() ![]() ![]() ![]() Location: gods country | you luck man ![]() | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | purple-haze - 10/1/2009 1:47 PM you luck man ![]() no mate dont need one going to have my home made one covered in leather | ||
chrisT![]() |
| ||
![]() MINT!!! Posts: 477 ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: gloucester | dazbooker - 10/1/2009 7:38 PM after a six hour drive got my new panels and carpet today off chris T, thanks mate for getting these. going to fit these tomorrow ready for my new seats. will posty another pic when fitted. no probs mate, should look mint when fitted along with the seats | ||
purple-haze![]() |
| ||
![]() Expert Posts: 1364 ![]() ![]() ![]() ![]() ![]() ![]() Location: gods country | just sat in garage doin nowt lol leather! nice choice ![]() | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | purple-haze - 10/1/2009 2:03 PM just sat in garage doin nowt lol leather! nice choice ![]() of course mate, i am looking at having a new roof lining made out of alcantara as well | ||
purple-haze![]() |
| ||
![]() Expert Posts: 1364 ![]() ![]() ![]() ![]() ![]() ![]() Location: gods country | good good and sounds like it gunna look mint inside...did you get the black carpet sorted aswell | ||
dazbooker![]() |
| ||
Expert Posts: 1265 ![]() ![]() ![]() ![]() ![]() Location: barnsley | purple-haze - 10/1/2009 2:13 PM good good and sounds like it gunna look mint inside...did you get the black carpet sorted aswell yeh got two carpets now so may have one spare dont know yet may keep it | ||
Jump to page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Now viewing page 5 [25 messages per page] |
Printer friendly version E-mail a link to this thread Jump to forum : |
(Delete all cookies set by this site) | |
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software | |