Metropower Portal
Metropower Portal
Search | Statistics | User listing Forums | Calendars |
You are logged in as a guest. ( logon | register )


Alloy PG1 Plugs (drail/fill/others)
Moderators:

   For Sale & Wanted-> For SaleMessage format
 
 
ralphh85
Posted 12/5/2011 2:22 PM (#608958)
Subject: Alloy PG1 Plugs (drail/fill/others)
Expert

Posts: 9862
5000200020005001001001002525
Location: Cornwall		these replicate the standard steel ones,

the new ones, small 3 take an 8mm allen key, large takes a 17mm allen key, supplied is an adapter so you can use a 17mm spanner/socket which i think everyone has!

these come with dowty washers with the fill/drain plugs, i recommend fitting these with locktite, and also do not over tighten them as they are only alloy.


Weight less than 50grams, and will make any gearbox look much better.

£20 posted for the lot.


Ralph

Edited by ralphh85 13/2/2012 11:18 AM




(Plugs.JPG)



(Plug Set.JPG)



(Plug Set2.JPG)



(plugs2.JPG)



Attachments
----------------
Attachments Plugs.JPG (36KB - 90 downloads)
Attachments Plug Set.JPG (30KB - 90 downloads)
Attachments Plug Set2.JPG (28KB - 89 downloads)
Attachments plugs2.JPG (85KB - 92 downloads)
 
Jack of Hearts
Posted 12/5/2011 2:25 PM (#608962 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)


Track Slag

Posts: 5060
50002525
Location: Washington		paid
 
ralphh85
Posted 17/5/2011 2:37 PM (#609707 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)
Expert

Posts: 9862
5000200020005001001001002525
Location: Cornwall		still got some of these forsale,


Ralph
 
Jack of Hearts
Posted 18/5/2011 12:10 AM (#609740 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)


Track Slag

Posts: 5060
50002525
Location: Washington		The quality of these is excellent
 
ralphh85
Posted 26/5/2011 8:11 AM (#611098 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)
Expert

Posts: 9862
5000200020005001001001002525
Location: Cornwall		and still got some of these left to,


Ralph
 
ralphh85
Posted 13/2/2012 11:18 AM (#647589 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)
Expert

Posts: 9862
5000200020005001001001002525
Location: Cornwall		Bump!
 
shafty
Posted 13/2/2012 12:36 PM (#647600 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)


Extreme Veteran

Posts: 572
5002525
Location: brixham , torbay		isnt that a bit risky alu on alu threads ? i know its always going to be lubed but all it takes is a tiny bit of shit to get in there ?? just a thort
 
ralphh85
Posted 13/2/2012 12:58 PM (#647603 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)
Expert

Posts: 9862
5000200020005001001001002525
Location: Cornwall		nah be fine, had no trouble so far, best put some lube in there but dont for see any problems, also its not like they need to come out every 6 months for an oil change,


Ralph
 
shafty
Posted 13/2/2012 1:07 PM (#647604 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)


Extreme Veteran

Posts: 572
5002525
Location: brixham , torbay		lol yeah your probly right ...who needs oil changes anyway.
 
ralphh85
Posted 13/2/2012 1:57 PM (#647611 - in reply to #608958)
Subject: RE: Alloy PG1 Plugs (drail/fill/others)
Expert

Posts: 9862
5000200020005001001001002525
Location: Cornwall		i think the PG1 gearbox was considered a sealed unit so once in place it never needs oil changed, on my car, even the engine doesnt get it oil changed lol. until it so low it knocks an oil light comes on round corners, then i top her up lol.



Ralph
Printer friendly version
E-mail a link to this thread
Jump to forum :


(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0
© 2003 PD9 Software