Photos of how i done it...

1. Remove the cassette holder bracket and screws.




2. Remove the gear knob (unscrews) and remove the gator by the 4 screws at the base. Replace the rubber protector and the metal brakcet and the 4 screws.




3. Drill a small hole in the places below and put 2 self tapper screws through.




4. Position the centre console and push forwards (towards the back of car) so the front is pressed down on the carpet. Screw the self tappers through the plastics.




5. Insert the bucket into the console.




6. Cut the gator in the same position as below.






7. Put the gator back on and and stretch the bottom of the gator around the bottom of the console. Screw the gear knob back on, and your all done.