Boot build
danny2009
Posted 18/12/2011 11:07 AM (#640392)
Subject: Boot build


Veteran

Posts: 425
10010010010025
Location: South Yorkshire		What thickness MDF would you recommend for a false floor kinda thing ?

Cheers
Miller
Posted 19/12/2011 6:10 AM (#640467 - in reply to #640392)
Subject: RE: Boot build


ADMIN

Posts: 2366
20001001001002525
Location: Chesterfield ish kinda sort of
danny2009 - 18/12/2011 7:07 PM

What thickness MDF would you recommend for a false floor kinda thing ?

Cheers


Depends how much weight is going on top of it and how much drilling into it

I'd say at least 10mm
Mutts
Posted 19/12/2011 8:09 AM (#640484 - in reply to #640392)
Subject: RE: Boot build


Lotus powered R100
MP Admin

500020001000500100100
Location: Torbay, South Devon, UK		Think you'll find you can't get 10mm.. but you can get 12mm.
chris_evz
Posted 19/12/2011 8:58 AM (#640488 - in reply to #640392)
Subject: RE: Boot build


aka chris_evz

Posts: 2726
200050010010025
Location: brynna south wales		3/4 inch is the best for better soud more acoustic any thinner to hollow any thicker to heavy
Mutts
Posted 19/12/2011 9:22 AM (#640490 - in reply to #640488)
Subject: RE: Boot build


Lotus powered R100
MP Admin

500020001000500100100
Location: Torbay, South Devon, UK
rover_mad - 19/12/2011 4:58 PM

3/4 inch is the best for better soud more acoustic any thinner to hollow any thicker to heavy


a.k.a. 19mm

However closest you can get is 18mm..
danny2009
Posted 19/12/2011 12:45 PM (#640513 - in reply to #640392)
Subject: RE: Boot build


Veteran

Posts: 425
10010010010025
Location: South Yorkshire		Sorry that was a tad vauge!. Im planning on carpeting the boot area, then a sheet of mdf with the sub screwed to it and the rear of the sub going into the spare wheel well so its all flush

The cars all sripped out but i cant live without some bass so im trying to keep the weight down as much as possible.

Edited by danny2009 19/12/2011 12:47 PM