Stainless Steel Anti Rollbar Brackets
ralphh85
Posted
11/10/2010 12:44 PM (#574122)
Subject:
Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
new pictures as these are now laser cut so a bit neater quality on the drop link brackets.
all stainless steel parts with tig welded stainless nuts, stainless bolts washers an nylocs and turned alloy spacers.
these will out last any metro an will never rust away, which most standard ones will have done.
£30 posted per set, absolute bargain!!!
Ralph
Edited by ralphh85 21/12/2011 2:16 PM
(ARB Parts.JPG)
(Bush Clamp.JPG)
(Drop link bracket.JPG)
Attachments
----------------
ARB Parts.JPG
(52KB - 129 downloads)
Bush Clamp.JPG
(13KB - 119 downloads)
Drop link bracket.JPG
(13KB - 130 downloads)
Mutts
Posted
6/7/2011 6:48 AM (#616965 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Lotus powered R100
MP Admin
Location: Torbay, South Devon, UK
Ralph.. checked mine last night
(that I've had for the last 3 or 4 years but never fitted!
)
Was an absolute bitch to undo the middle bolt in one of the 'C' brackets - looks like the thread has been crushed at some stage..
Can you hook me up with a complete set of the above please
Also need one of these
(not sure where it mounts but I certainly have nothing on that side atm!
)
http://www.metropower.org.uk/forum/forums/thread-view.asp?tid=65385&posts=6
Cheers you grizzly pasty muncher
ralphh85
Posted
6/7/2011 7:13 AM (#616971 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
PMed an thanks for the bump!
Ralph
edit, an theres nout wrong with pasties
ralphh85
Posted
12/8/2011 2:26 AM (#623168 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
Bump!
niksutty
Posted
12/8/2011 7:57 PM (#623332 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Token A Series
Posts: 630
Location: Leicester
These fit a series? Front or rear?
Metromartin
Posted
13/8/2011 4:39 AM (#623358 - in reply to #623332)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
MP Admin
Posts: 17870
Location: Gloucester
niksutty - 13/8/2011 12:57 AM
These fit a series? Front or rear?
rear ARB is all the same on A & K so they will fit,
front ARB nothing is the same.
niksutty
Posted
17/8/2011 10:35 PM (#624220 - in reply to #623358)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Token A Series
Posts: 630
Location: Leicester
Metromartin - 13/8/2011 11:39 AM
niksutty - 13/8/2011 12:57 AM
These fit a series? Front or rear?
rear ARB is all the same on A & K so they will fit,
front ARB nothing is the same.
Mine doesn't have the middle bolt on the 'horseshoe shaped bit...?
ralphh85
Posted
21/8/2011 8:29 AM (#624851 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
middle bolt holds the drop link on.
will do these at discount rate of £25 set this week only as off on holiday next weekend!
Ralph
niksutty
Posted
21/8/2011 3:45 PM (#624923 - in reply to #624851)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Token A Series
Posts: 630
Location: Leicester
I'll take a set... where do i send the monies?
muzza
Posted
21/8/2011 8:40 AM (#624852 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Nutta With An Orange Grille
Posts: 5280
Location: Who put that pit there keep falling down :(
How much for just the bush clamps ?
ralphh85
Posted
21/12/2011 2:15 PM (#640785 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
Bump!
DrDan
Posted
25/3/2012 6:18 PM (#653408 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Member
Posts: 30
Hi Ralph
How much would it be for just the bush clamps?
I have the 'C' links but the bush clamps supplied with my ARB have bolts sheared off in them.
Dan
ralphh85
Posted
26/3/2012 11:03 AM (#653499 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
£15, sounds like some lube was needed in them!
Ralph
ralphh85
Posted
10/1/2013 8:05 PM (#686384 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
More of these ready,
ralph
Metro88
Posted
10/1/2013 11:14 PM (#686401 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Regular
Posts: 152
Do you have any of the drop link brackets available now?
ralphh85
Posted
12/11/2013 1:38 PM (#705958 - in reply to #574122)
Subject:
RE: Stainless Steel Anti Rollbar Brackets
Expert
Posts: 9862
Location: Cornwall
Bump all available!
Stainless Steel Anti Rollbar Brackets
