![]() |
111Sli![]() |
| ||
![]() Transport Guru MP Moderator Posts: 4947 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Bromley, Kent | Hi, will a R45 Blaupunkt go straight in and connect up with my ISOs etc... Thanks! | ||
Metromartin![]() |
| ||
![]() MP Admin Posts: 17870 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Gloucester | If its the same as the 25 one yes, it doesn't use the clock display so its ok for a metro. Not sure if it has the rover remote function though. | ||
111Sli![]() |
| ||
![]() Transport Guru MP Moderator Posts: 4947 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Bromley, Kent | Yeah, that's the one. The one that has the Rover logo actually printed on the front and the large sticky outy rubber volume control. ![]() Just found this thread on .org which may be of use if considering fitting one; It mentions about an adapter to the BMW type connector and which pins are needed for wheel controls. http://forums.mg-rover.org/showthread.php?t=273472 Edited by 111Sli 9/8/2011 11:50 AM | ||
Metromartin![]() |
| ||
![]() MP Admin Posts: 17870 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Gloucester | 111Sli - 9/8/2011 4:47 PM Yeah, that's the one. The one that has the Rover logo actually printed on the front and the large sticky outy rubber volume control. ![]() Just found this thread on .org which may be of use if considering fitting one; It mentions about an adapter to the BMW type connector and which pins are needed for wheel controls. http://forums.mg-rover.org/showthread.php?t=273472 Thats the same radio my dad has in his project W reg Rover 25 on mg-rover.org Its just standard ISO. In 2002 BMW changed the ISO plug to the massive BMW radio connector. On my bros 02 reg R25 I had to buy a BMW to ISO wiring conenctor to fit an after market cd player. You dont need the bmw adaptor as yours is ISO already. | ||